Our energy needs and dependence on electricity and gas has increased many folds in the last few decades. We depend on appliances for most of our daily chores. Energy bills and gas bills account for a major spending every month for households. Technically it is very difficult to cut down on energy usage but we can definitely reduce the bills by adopting smarter solutions. One of the easiest ways to do so is by using Smart Meters. These meters give us more control over our energy consumption allowing us to cut down on energy consumption substantially by avoiding wastage of energy.

It has been estimated that every household spends about 54% of the energy for heating and cooling alone and most of the energy wastage occurs in running these appliances. Thus one of the ways to consume lesser energy would be to ensure that our air conditioners and water heaters are used more efficiently. Smart Meters help us in consuming energy efficiently.

Why Are Smart Meters Smart?

The traditional household meters charge us based on the total energy consumption per month. What such meters cannot tell us is how much energy we are consuming during particular phases of a day for instance during the peak hours. Smart meters on the other hand the fees on a per-hour basis. They directly communicate with your energy supplier and ensure that the bills are more accurate helping you pay only for what you use. Let us now take a look at some of the advantages that these meters offer and how we can cut down on the energy consumption in our daily lives.

• These meters give us near real-time information on energy use that is expressed in pounds and pence. When you are armed with this information you can easily cut down on the energy consumption during peak hours when some suppliers charge you a higher tariff.
• Such meters have the ability to manage energy use. All the energy that comes from the supplier to our house in used in a much more efficient way by preventing any leakage. This means that you can save money and reduce emissions for a better future.
• As we have discussed earlier Smarter Meters are bringing an end to estimated billing. The supplier doesn't need to come to your home to get the reading as the meter constantly communicates the same to your supplier. Thus you pay only for what you use.

However switching to Smart Meters alone won't help you reduce energy consumption as you need to adopt more energy efficient appliances and lighting solutions in your home. For example traditional halogen bulbs waste about 80% of the energy as heat and convert only 20% energy into light. Switching to CFLs and LED lights you can cut down on the consumption by about 75%. Maintaining your air conditioners at 77°F/25°C and turning them off before leaving home can also reduce the consumption of energy. You can also alternate between a fan and an AC to reduce energy consumption.

This post is contributed by SpireMT, a leading supplier of Electrical Energy Meters, Handheld Ultrasonic Flow Meter, digital flow meters, water flow meter, Handheld Ultrasonic Flow Meter and many more. For more information visit at http://www.spiremt.com

Various types of industries require measuring the flow of a liquid or gas. Several technological upgrades over the years have helped in efficient measurement of the same. For instance, a water flow meter is useful in measuring the flow of water in residential premises as well as in industries. This helps in accurate distribution of water in homes, industries and commercial establishments. In addition, it is quite useful in determining water leaks as well.

There are two major types of flow meters, which are specified below:

1. Positive Displacement Meter
2. Velocity Water Flow Meter

Positive Displacement Meter: The Positive Displacement Meter is perfect for low usage, such as in homes and apartments. This type of meter compares the flow of water by comparing the current amount of water held in the chamber with the previous quantity. It provides a fair idea of the total quantity of water consumed.

Velocity Flow Meter: The Velocity Flow Meter makes use of the velocity of water flow to determine the quantity of water consumed. Intricate mechanisms are made use of in measuring the velocity of water. Various types of velocity meters are used in different industries. The most common ones include multi-jet meters, venture meters, orifice meters, ultrasonic meters, magnetic meters and turbine meters.

The Velocity Flow Meters are perfect for measuring huge quantities of water accurately. Hence these are preferred in heavy industries where there is a substantial consumption of water daily. Certain industries make use of flaw detectors as well for accurate measurement of the water flow. One can choose among multiple varieties of water flow meters. These meters are capable of measuring even a small trickle of water accurately. In this way, accurate measurements can be obtained for billing purposes.

A Digital Water Meter is worth mentioning here. It measures the quantity of water consumed in cubic meters or cubic feet. Owing to its high accuracy, it is preferred for installation in homes and offices. Installing it is pretty easy and it has loads of interesting features. It makes use of high end technology to measure water flow accurately and display the reading in real time with an attractive digital meter that can be configured in myriad ways.

Water leakage at any point in the supply line can prove to be dangerous. If the problem is not addressed immediately, it can lead to severe accidents. High end water flow meters available in markets these days can indicate water leakage and pin point to the exact location. This essentially helps in fixing the issue well before it can cause severe structural damage and cause loss of life and property. When shopping for water meters, make it a point to discuss this aspect with your vendor.

Make sure that you spend sufficient time and effort in locating a water flow meter supplier that satisfies your requirements completely. If needed, check out the feedback given to it by its previous clients on various Internet portals. You would want to be completely sure about its quality to ensure accurate measurement of water flow.

This post is contributed by SpireMT, a leading supplier of Magnetic Flow Meters, Handheld Ultrasonic Flow Meter, digital flow meters, water flow meter, Ultrasonic Heat Meters and many more. For more information visit at http://www.spiremt.com

When does the need of measuring the velocity of a liquid arise? Well, there are several such scenarios in which this may be needed. For instance, a big manufacturing industry may need continuous flow of water for cooling purpose. In addition, a chemical manufacturing company will need to measure the flow of a chemical in the liquid form to ensure that just the final product has just the right mix of ingredients. Ultrasonic flow meters happen to be extremely useful in such scenarios.

Another industry that needs water flow measurement is the waste water processing industry, where it is necessary to determine the flow of water accurately. Incorrect measurement of the water flow can lead to huge losses that can jeopardize its operating margins. An ultrasonic flow meter is perfect for usage in a wide variety of industries owing to the several benefits that it provides, including absence of moving parts and high accuracy.

Measuring the flow of liquids having high turbidity is extremely difficult owing to the fact that the moving parts cannot cut through them. Besides that, chemical compatibility is another important issue to address when measuring the flow of highly reactive liquids such as acids. These liquids can react with the material of the flow meter and eat it up in due course of time. On the other hand, there is absolutely no moving part in ultrasonic flow meters and hence there is no risk of destruction of the flow meter hardware.

Way of operation

Ultrasonic flow meters have an interesting way of operation. These meters make use of ultrasonic waves that are broadcast towards the moving liquid. When these waves strike anything, these return back. The speed with which these waves return to the transmitter/ receiver happens to indicate the flow of the liquid in question.

There are three main types of ultrasonic flow meters available in the market:

1. Transmission Flow Meters
2. Doppler Flow Meters
3. Open Channel Flow Meters

Transmission Flow Meters: Transmission flow meters can be further classified as clamp-on (non intrusive) and in-line (intrusive) transmission flow meters. These meters work by measuring the rate at which ultrasonic beam is returned after hitting a particle.

Doppler Flow Meters: Doppler Flow Meters make use of Doppler Shift that emanates due to the reflection of an ultrasonic beam when it hits sonically reflective materials. These flow meters are perfect for measuring the flow of slurries, gases that have sound reflecting particles and liquids with bubbles. These meters can also be used for measuring the flow of blood. These meters, however, are not suitable for measuring the flow of clear drinking water.

Given the several advantages of these meters and the fact that there are no components that can get corroded after long time usage, these meters are perfect for usage in a variety of industries. These meters have an exceptionally long life and hence help in significant cost savings as well. If you are looking forward to installation of splendid quality meters for measuring flow of any liquid, consider the ultrasonic flow meters!

This post is contributed by SpireMT, a leading supplier of Ultrasonic Flow Meters, Handheld Ultrasonic Flow Meter, digital flow meters, water flow meter,Handheld Ultrasonic Flow Meter and many more. For more information visit at http://www.spiremt.com

Nowadays, flow meters have become a common sight at houses as well as industries. A flow meter is basically used for measuring the flow rate of gas or liquids. The different flow rates which can be read with the help of these devices are - linear, non linear, volumetric and mass flow rates.

Flow meters are available in many varieties to meet different purposes. Of them, gas flow meters are very common and crucial devices. Gas flow meter measures and regulates the quantity of gas that needs to be used for heating, cutting, welding and several other such purposes, industrially as well as residentially.

Why Flow Meters are Widely Used?

Everyone is aware of the fact that fuel prices are going up day by day because resources are drying up. It is our responsibility and liability to save these resources for the generations to come. This makes it essential that we have a controlled usage of fuel; and for this, proper measurement device is required to manage it. Flow meters exactly serve this purpose in a customized way. For instance, the fuel flow meter acts as an indicator to show the amount of fuel left in the storage and expected duration of usage etc. These meters are also helpful in identifying any potential hazards like a possible leakage of gas or low / high flow rates.

The users of flow meters certify to the fact that these devices have helped them save gas and in turn cut down their utility bills up to a significant extent. Going by the rate of increase in fuel usage and the scarcity of the availability, soon we can expect regulatory enactment in place to mandate the use of flow meters at all places where fuel energy is utilized.

Things to Know about Usage of Flow Meters

There are many types of flow meters available in the market. However, you have to make sure that you purchase and use only high-quality devices. Always check for the quality certification as well as the credibility of the manufacturer while purchasing flow meters. Do keep in mind that if the meters are tampered by any sources, it will not only just lead to increasing your utility bill, but can also cause severe safety hazards for your house or company.

The flow meters are expected to meet certain standardized specifications mentioned by the regulating authorities in order to be sold in the market. However, there are some improper channels which release several low-quality imitations in market from time to time. To make your purchase safe, remember that the original devices are equipped with a push fit box that is sealed to offer complete protection; and the box cannot be opened or manipulated unless you break it.

The flow meters are delicate instruments and may need some changes or corrections in a couple of years or three years' time. Hence, if you suspect any malfunctioning, submit it for proper servicing at an authorized service center. Do not try to repair it yourself or ignore the need for servicing, which may lead to dangerous after effects.

This post is contributed by SpireMT, a leading supplier of Ultrasonic Flow Meters, Handheld Ultrasonic Flow Meter, digital flow meters, water flow meter, Magnetic Flow Meters and many more. For more information visit at http://www.spiremt.com

Measuring the flow of liquid or gases is essentially critical for the functioning of certain industries. It is immensely important for them to measure the flow accurately, otherwise that can result in significant losses for them. Even a slight error in this regard can prove to be immensely costly. Ultra sonic meters that provide highly accurate measurement of liquid flow are immensely useful in this regard. Here are some advantages of these meters over other traditional meters.

The ultra sonic meters send ultrasonic signals through the fluid, which get reflected when any discontinuity like a bubble is encountered. The time lapse after which the signal is received back helps in determining the speed of the liquid. Some of the important advantages of the ultra sonic meters include the following:

1. Useful in a variety of industries
2. Ability to be operated remotely
3. Measure flow of different gases and liquids
4. Eco friendly and Low Maintenance Costs

Useful in a variety of industries: The ultra sonic meters are useful in a variety of industrial applications. These can be used by chemical industries, waste water management companies, and other heavy industries that need to monitor the flow of all sorts of fluids round the clock. The traditional types of meters are not suited for a number of such industries owing to their inherent limitations.

Ability to be operated remotely: Operators can operate these meters from a remote location pretty easily. These are highly advanced meters and can be controlled using a control panel that can be situated at a sizeable distance from the system being monitored. Hence, one needs not to work in a hazardous situation where there is a significant risk of getting injured owing to pipe burst or any other such accident.

Measure flow of different gases and liquids: The ability to measure the flow of various gases and liquids is essentially the biggest advantage of the ultra sonic meters. These are perfect for measuring flow of even those fluids that are pretty difficult to control. For instance, due to its high pressure and temperature, the flow of steam becomes incredibly difficult to measure, while doing that is critical for operation of power plants and certain heavy industries. The task can be completed easily using these meters.

In addition, it is not feasible to use the traditional meters for measuring the flow of drinking water and clear liquids as that can lead to quality issues. On the other hand, this task can be completed with ease using ultra sonic meters. One can go on counting the types of industries in which these meters are replacing the traditional meters for this very reason.

Eco Friendly and Low Maintenance Costs

The ultra sonic meters are quite eco friendly for the fact that these do not result in environmental pollution or sound pollution in any way. Since these meters make use of ultra sonic waves for tracking the flow, there is little or no maintenance required for them. Once installed, these can go on and on for several years without failing.

This post is contributed by SpireMT, a leading supplier of Ultrasonic Flow Meters, magnetic flow meters, digital flow meters, water flow meter,Handheld Ultrasonic Flow Meter and many more. For more information visit at http://www.spiremt.com

Choosing a flowmeter can be a challenging task because it comes in many varieties. Adding to this, there are several factors also which have to be closely observed while selecting the one. Hence, to help you buy the best flow system for your application quickly, some tips are being shared below.

Tips to Choose the Best Flowmeter

Identify Need:

If you just want to note the flow of a liquid or gas in a pipeline, then buying a simple flow indicator makes sense. A flowmeter indicator for this purpose can be obtained at cost-effective rates from a reputed vendor. You can install these flow indicators easily as these don't need any external power. In fact, you can very well do without a flowmeter if the flow which needs to be measured is limited to the rate of 10%. But for convenience, you can always go with a simplified version of this system.

Think beyond Price:

Cost should not be the driving factor behind your purchase of flowmeter. A flowmeter bought at cheap prices can give you only short-term advantages. If you buy a flowmeter at the expense of technical support from the supplier, then it's not worth considering. Because a cost-effective solution is one which comes with technical back-up, test facilities, and product guarantee, etc.

Gauge the Flow:

In order to find the perfect flowmeter for your application, you have to understand the behavior of liquid or gas passing through the pipeline. This can be defined in terms of viscosity. You have to check the resistance of liquid or gas to flow as this can affect their flow speed or velocity in the pipeline.

To be precise, in order to choose the most suitable option, you have to analyze the Reynolds number of your application, which can be done by noting down its minimum and maximum viscosity and flow rate. Once the number is calculated, you can compare it with the Reynolds range of a flowmeter to determine your selection.

Check the Turndown Ratio:

Turndown ratio indicates flowmeter's ability to measure the maximum and minimum flow rates of a liquid or gas within an accurate range. Since it is difficult to ascertain the exact range of flows to be gauged, experts recommend users to opt for a flowmeter that provides wide turndown ratio for all the different types of flow variations. Choose on the basis of application:

You have to pick a flowmeter that goes well with your application. For instance, if you want to measure widest flow range, then electromagnetic meters are good. For maximum short-term repeatability, turbine meters are suitable. For viscous substances, you can opt for the relatively expensive Coriolis mass flowmeters.

In addition to all these factors, you also have to see where and how your flowmeter can be positioned for best performance. The accuracy and repeatability of your flowmeter may get affected if the area near pipeline is not clear. To ensure the flowmeter is well installed, do look for manufacturer's assistance. Another thing is that your flowmetering system should consist of compatible components such as a meter, a flow computer or such other output device. For this, you have to make sure that you buy the whole system from one supplier in order to stick to the same standards.

This post is contributed by SpireMT, a leading supplier of ultrasonic flow meters, magnetic flow meters, digital flow meters, water flow meter, electrical energy meters and many more. For more information visit at http://www.spiremt.com

When it comes to measuring the flow of water, specifically the wastewater, a portable ultrasonic flow meter is the most considered gadget for the job. The gadget uses ultrasonic waves in water to calculate water circulation. Portable ultrasonic flow meters have given the upper hand compared to the mainstream physical meters simply because they are easy to maintain and because of their simple mechanical layout, they are durable. Ultrasonic meters are also ideal for measuring highly corrosive fluids where material compatibility may be an issue. Ultrasonic flow meters are installed from outside fluid pipes and use the ultrasonic transit time technique to determine the rate of flow.

If the need arises for measuring amounts of muddy fluids on a regular basis, then these volumetric circulation meters come in handy. It is of the essence to note that these gadgets only function in waters with particulates. The recommended size of the particulates should be at least 100 microns with no bubbles in the water. The flow of murky water with particles should be at least 100 particles per minute. The volumetric circulation meters will not perform accurately if the wastewater has heavy coagulated. Dense particles will definitely prevent the ultrasound dunes from moving through the fluid.

In order to achieve maximum efficiency from the ultrasonic movement meter, one needs to decide on an excellent performing machine. With various industrial firms manufacturing the gadgets, there are still many of them are bringing less worthy devices to the market. Therefore, the following factors must be considered when selecting portable ultrasonic flow meters:

A handheld monitor is considered for measuring dimensions from time to time.

• A steady process monitor is a fixed type and is needed when you have to constantly check for water flow for a widespread period.
• The maximum and minimum rates of flow also need to be considered. The same goes for process force and process heat that the meter will have to measure.
• The size of the fluid tube is also an important element to consider
• You also have a choice to select between analogue and digital results.

Selecting the appropriate ultrasonic flow meter is a factor to consider as the same goes for its usage. It is extremely important to purchase ultrasonic flow meter from a trusted supplier to ensure that you benefit from aftermarket services such as spares and repairs. Ultrasonic flow meters are intended to be used for long term basis hence the aftermarket support is very vital. The organization that you intend to buy the meters from should also offer you the range of meters to select from so that you choose the kind that suits your needs and requirements. Specifications of the ultrasonic meters may differ with intended use. The chosen supplier should educate and advise clients on capacities, efficiency and usage of the variety of meters. This will automatically lead to informed consent from the client.

This post is contributed by SpireMT, a leading supplier of portable ultrasonic flow meter, magnetic flow meters, digital flow meters, water flow meter, electrical energy meters and many more. For more information visit at http://www.spiremt.com