Measuring the flow of liquid or gases is essentially critical for the functioning of certain industries. It is immensely important for them to measure the flow accurately, otherwise that can result in significant losses for them. Even a slight error in this regard can prove to be immensely costly. Ultra sonic meters that provide highly accurate measurement of liquid flow are immensely useful in this regard. Here are some advantages of these meters over other traditional meters.

The ultra sonic meters send ultrasonic signals through the fluid, which get reflected when any discontinuity like a bubble is encountered. The time lapse after which the signal is received back helps in determining the speed of the liquid. Some of the important advantages of the ultra sonic meters include the following:

1. Useful in a variety of industries
2. Ability to be operated remotely
3. Measure flow of different gases and liquids
4. Eco friendly and Low Maintenance Costs

Useful in a variety of industries: The ultra sonic meters are useful in a variety of industrial applications. These can be used by chemical industries, waste water management companies, and other heavy industries that need to monitor the flow of all sorts of fluids round the clock. The traditional types of meters are not suited for a number of such industries owing to their inherent limitations.

Ability to be operated remotely: Operators can operate these meters from a remote location pretty easily. These are highly advanced meters and can be controlled using a control panel that can be situated at a sizeable distance from the system being monitored. Hence, one needs not to work in a hazardous situation where there is a significant risk of getting injured owing to pipe burst or any other such accident.

Measure flow of different gases and liquids: The ability to measure the flow of various gases and liquids is essentially the biggest advantage of the ultra sonic meters. These are perfect for measuring flow of even those fluids that are pretty difficult to control. For instance, due to its high pressure and temperature, the flow of steam becomes incredibly difficult to measure, while doing that is critical for operation of power plants and certain heavy industries. The task can be completed easily using these meters.

In addition, it is not feasible to use the traditional meters for measuring the flow of drinking water and clear liquids as that can lead to quality issues. On the other hand, this task can be completed with ease using ultra sonic meters. One can go on counting the types of industries in which these meters are replacing the traditional meters for this very reason.

Eco Friendly and Low Maintenance Costs

The ultra sonic meters are quite eco friendly for the fact that these do not result in environmental pollution or sound pollution in any way. Since these meters make use of ultra sonic waves for tracking the flow, there is little or no maintenance required for them. Once installed, these can go on and on for several years without failing.

This post is contributed by SpireMT, a leading supplier of Ultrasonic Flow Meters, magnetic flow meters, digital flow meters, water flow meter,Handheld Ultrasonic Flow Meter and many more. For more information visit at http://www.spiremt.com

Choosing a flowmeter can be a challenging task because it comes in many varieties. Adding to this, there are several factors also which have to be closely observed while selecting the one. Hence, to help you buy the best flow system for your application quickly, some tips are being shared below.

Tips to Choose the Best Flowmeter

Identify Need:

If you just want to note the flow of a liquid or gas in a pipeline, then buying a simple flow indicator makes sense. A flowmeter indicator for this purpose can be obtained at cost-effective rates from a reputed vendor. You can install these flow indicators easily as these don't need any external power. In fact, you can very well do without a flowmeter if the flow which needs to be measured is limited to the rate of 10%. But for convenience, you can always go with a simplified version of this system.

Think beyond Price:

Cost should not be the driving factor behind your purchase of flowmeter. A flowmeter bought at cheap prices can give you only short-term advantages. If you buy a flowmeter at the expense of technical support from the supplier, then it's not worth considering. Because a cost-effective solution is one which comes with technical back-up, test facilities, and product guarantee, etc.

Gauge the Flow:

In order to find the perfect flowmeter for your application, you have to understand the behavior of liquid or gas passing through the pipeline. This can be defined in terms of viscosity. You have to check the resistance of liquid or gas to flow as this can affect their flow speed or velocity in the pipeline.

To be precise, in order to choose the most suitable option, you have to analyze the Reynolds number of your application, which can be done by noting down its minimum and maximum viscosity and flow rate. Once the number is calculated, you can compare it with the Reynolds range of a flowmeter to determine your selection.

Check the Turndown Ratio:

Turndown ratio indicates flowmeter's ability to measure the maximum and minimum flow rates of a liquid or gas within an accurate range. Since it is difficult to ascertain the exact range of flows to be gauged, experts recommend users to opt for a flowmeter that provides wide turndown ratio for all the different types of flow variations. Choose on the basis of application:

You have to pick a flowmeter that goes well with your application. For instance, if you want to measure widest flow range, then electromagnetic meters are good. For maximum short-term repeatability, turbine meters are suitable. For viscous substances, you can opt for the relatively expensive Coriolis mass flowmeters.

In addition to all these factors, you also have to see where and how your flowmeter can be positioned for best performance. The accuracy and repeatability of your flowmeter may get affected if the area near pipeline is not clear. To ensure the flowmeter is well installed, do look for manufacturer's assistance. Another thing is that your flowmetering system should consist of compatible components such as a meter, a flow computer or such other output device. For this, you have to make sure that you buy the whole system from one supplier in order to stick to the same standards.

This post is contributed by SpireMT, a leading supplier of ultrasonic flow meters, magnetic flow meters, digital flow meters, water flow meter, electrical energy meters and many more. For more information visit at http://www.spiremt.com

When it comes to measuring the flow of water, specifically the wastewater, a portable ultrasonic flow meter is the most considered gadget for the job. The gadget uses ultrasonic waves in water to calculate water circulation. Portable ultrasonic flow meters have given the upper hand compared to the mainstream physical meters simply because they are easy to maintain and because of their simple mechanical layout, they are durable. Ultrasonic meters are also ideal for measuring highly corrosive fluids where material compatibility may be an issue. Ultrasonic flow meters are installed from outside fluid pipes and use the ultrasonic transit time technique to determine the rate of flow.

If the need arises for measuring amounts of muddy fluids on a regular basis, then these volumetric circulation meters come in handy. It is of the essence to note that these gadgets only function in waters with particulates. The recommended size of the particulates should be at least 100 microns with no bubbles in the water. The flow of murky water with particles should be at least 100 particles per minute. The volumetric circulation meters will not perform accurately if the wastewater has heavy coagulated. Dense particles will definitely prevent the ultrasound dunes from moving through the fluid.

In order to achieve maximum efficiency from the ultrasonic movement meter, one needs to decide on an excellent performing machine. With various industrial firms manufacturing the gadgets, there are still many of them are bringing less worthy devices to the market. Therefore, the following factors must be considered when selecting portable ultrasonic flow meters:

A handheld monitor is considered for measuring dimensions from time to time.

• A steady process monitor is a fixed type and is needed when you have to constantly check for water flow for a widespread period.
• The maximum and minimum rates of flow also need to be considered. The same goes for process force and process heat that the meter will have to measure.
• The size of the fluid tube is also an important element to consider
• You also have a choice to select between analogue and digital results.

Selecting the appropriate ultrasonic flow meter is a factor to consider as the same goes for its usage. It is extremely important to purchase ultrasonic flow meter from a trusted supplier to ensure that you benefit from aftermarket services such as spares and repairs. Ultrasonic flow meters are intended to be used for long term basis hence the aftermarket support is very vital. The organization that you intend to buy the meters from should also offer you the range of meters to select from so that you choose the kind that suits your needs and requirements. Specifications of the ultrasonic meters may differ with intended use. The chosen supplier should educate and advise clients on capacities, efficiency and usage of the variety of meters. This will automatically lead to informed consent from the client.

This post is contributed by SpireMT, a leading supplier of portable ultrasonic flow meter, magnetic flow meters, digital flow meters, water flow meter, electrical energy meters and many more. For more information visit at http://www.spiremt.com